

The standard choice for pre-tensioning and post-tensioning in buildings, car parks, precast beams and slabs. Available in 12.7 mm and 15.2 mm.

For structures exposed to salt, moisture or aggressive soil. If you work near the Red Sea or Arabian Gulf coast, or on structures with chloride exposure, this is the strand to ask about.

A zinc coating protects against oxidation, so it suits outdoor structures, stay cables and long-life infrastructure.

Greased and sheathed in PE for post-tensioned slabs, which allows thinner floors and longer spans.
Diameters range from 7.94 mm to 17.8 mm. Need a special length, coil weight or packing? Tell us and we will quote it.
| Item | 12.5mm | 12.9 mm | 15.2 mm |
|---|---|---|---|
| Standard | ASTM A416 / EN 10138 | ASTM A416 / EN 10138 | ASTM A416 / EN 10138 |
| Tensile strength | 1860 MPa | 1860 MPa | 1860 MPa |
| Nominal area | 93 mm² | approx. 100 mm² | approx. 139 mm² |
| Minimum breaking load | 173 kN | 186 kN | 259 kN |
| Construction | 7-wire, low relaxation | 7-wire, low relaxation | 7-wire, low relaxation |
Values are typical. Final figures are stated on the mill test certificate for each batch.

Saudi Arabia checks imports through the SABER platform. The importer registers the product, and regulated goods need a Certificate of Conformity from an approved certification body. Each shipment then needs its own Shipment Certificate. We prepare the manufacturer-side documents and work with approved bodies so your importer is not left chasing paperwork. Please confirm with us early whether your HS code and order fall under a regulated category.
Coastal and humid sites call for epoxy coated or hot dipped galvanized strand. Interior slabs and precast beams usually work well with plain or indented strand. If you are unsure, send us the project environment and we will recommend.
Heat number, coil number and mill certificate should match what is printed on the coil tag. We make that standard.
| Loading port | Tianjin, China |
|---|---|
| Delivery ports | Jeddah Islamic Port, King Abdullah Port, Dammam |
| Terms | FOB, CFR, CIF |
| Lead time | 15-25 days based on the quantity after order and deposit |
| Packing | Steel or wooden reel, coil, container-ready |
| Container | 20GP / 40HQ |
| Documents | Commercial invoice, packing list, bill of lading, Certificate of Origin, mill test certificate, SGS report on request, and the documents your importer needs for SABER |
| Payment | LC at sight or T/T (30% advance) |
Yes. We supply importers, distributors, contractors and precast plants, for single projects and for regular repeat orders.
Orders start from about 20 MT. Mixed diameters or coatings in one shipment are possible, so tell us what you need.
It depends on exposure. For coastal, humid or salt-affected structures we recommend epoxy coated or hot dipped galvanized strand. For interior or well-protected elements, plain or indented low-relaxation strand is usually enough.
Plain strand is the general-purpose choice. Indented strand bonds better with concrete, which suits precast. Unbonded strand is greased and sheathed for post-tensioned slabs.
Yes: ASTM A416, BS 5896 and EN 10138. A mill test certificate comes with each batch, and third-party inspection can be arranged.
We support the manufacturer side of the process and work with approved certification bodies. Your importer handles the SABER registration. Contact us before ordering so we can confirm what applies to your product.
Jeddah Islamic Port, King Abdullah Port and Dammam, plus other ports on request.
Typically 15-25 days based on the quantity after order confirmation and deposit, plus sea freight to your port.
Yes. Ask us for a sample, a mill test certificate example, or a third-party report.
Price changes with steel costs, diameter, coating and freight. Send us your specification and quantity and we will quote you the same day.
