Premium Flexible Support for Solar Panels

• Customisable dimensions & load capacity – The product listing shows “Dimensions (mm) – customizable” and “Load capacity (kg) – customizable”, making it adaptable to varied solar panel setups. 

• Multiple finish options for enhanced protection – The support is offered in:

• Galvanized finish (ASTM A123, ISO 1461, EN10346, BS EN ISO 1461, UL 797)

• Galvanized & unbonded (ASTM A153, A416, ISO 1461, EN10346, UL 797)

• Epoxy‑coated (ASTM A884, A775, EN14989, ISO 10590) 
  These coatings increase durability, resist corrosion, and suit harsher environments.

• Flexible/adaptable support mounting – While specific features aren’t elaborated in detail on the page, the term “Flexible Support for Solar Energy” suggests that the support is designed to accommodate a variety of mounting geometries or dynamic conditions (e.g., movement, tilt, load variation).

• Industry standard compliance – Adherence to recognised standards gives assurance of quality and suitability for structural mounting in solar installations.

• Reduced structural risk – A robust support system ensures that the solar panels remain securely mounted, reducing the risk of failure from wind, load, or corrosion over time.

• Rooftop solar installations where solar panels need to be securely mounted on flat or slightly tilted roofs, especially where the roof structure may require flexible adjustment.

• Ground‑mounted solar farms where supports must resist environmental loads and possibly be adjusted to panel array layouts.

• Commercial or industrial PV installations where long‑term durability is critical (given the epoxy or unbonded galvanised finishes).

• Locations with high corrosion risk (e.g., coastal areas) where the epoxy‑coated or unbonded galvanised finish would provide added protection.

• Custom or non‑standard installations where panel size, shape or layout vary, and a support system with customisable dimensions and load capacity is required.

Q: What is the Premium Flexible Support for Solar Panels?

A: It is a robust, customisable mounting support designed to securely hold solar panels on rooftops or ground-mounted installations. It is available in multiple finishes to resist corrosion and environmental wear.

Q: What materials and finishes are available?

A: The support comes in three options:

• Galvanized finish – for standard corrosion resistance.

• Galvanized & unbonded – for enhanced durability in harsher environments.

• Epoxy-coated – for maximum corrosion protection, ideal for coastal areas.

Q: Can the support dimensions and load capacity be customized?

A: Yes, both the dimensions and load capacity can be tailored to meet the specific requirements of your solar panel installation.

Q: Where can this support be used?

A: It can be used for rooftop solar panels, ground-mounted solar farms, commercial or industrial PV installations, and locations with high exposure to weather or corrosive conditions.

Q: Does the product comply with industry standards?

A: Yes, it meets standards such as ASTM A123, ISO 1461, EN 10346, UL 797, and ASTM A153 / A416, depending on the finish type, ensuring reliable and safe solar panel mounting.